YYGL45R | OEM / ODM / distributor supply
A 45mm AC motor with built-in receiver, mechanical limit switch and remote-control operation for roller shutters, awnings, zip screens and outdoor shading systems.
Quick decision
Best for projects that need integrated remote control
Best For
- Roller shutters requiring remote control
- Awnings and zip screens with wireless operation
- Outdoor shading systems using AC power
- OEM buyers needing an integrated receiver solution
- Projects where a separate external receiver is not preferred
- Distributor programs requiring easier installation and end-user operation
Not Recommended For
- Narrow systems requiring very short motor length
- Battery-powered indoor blinds
- Projects requiring app control, Wi-Fi, Zigbee or Matter without an additional compatible controller
- Manual operation during power failure; use YYGL45M if manual override is required
- Fire shutter or safety-critical systems without project-specific certification
- Applications with very frequent operation without duty cycle confirmation
Model positioning
Why choose YYGL45R
YYGL45R is Walter Motor’s 45mm AC built-in receiver model with mechanical limit setting. It is selected when the buyer wants remote-control operation while reducing the need for a separate external receiver in standard roller shutter, awning, zip screen and shading system projects.
| Model | Control and limit positioning | Typical selection reason |
|---|---|---|
| YYGL45S | Standard mechanical limit wired motor | Wall switch or external receiver projects |
| YYGL45R | Mechanical limit motor with built-in receiver | Remote control operation with simplified receiver setup |
| YYGL45B | Electronic limit / parallel control option | Projects requiring electronic limit or supported parallel control |
| YYGL45E | Electronic limit with receiver | Projects requiring electronic limit plus receiver control |
| YYGL45M | Mechanical limit with manual override | Projects requiring manual crank operation during power failure |
| YYGL45SD | Short body design | Limited installation width where standard body length is too long |
| WM45DS | DC or solar-powered solution | Projects requiring low-voltage or solar-powered operation |
Key specifications
Procurement-level summary
Motor diameter
45mm
Torque range
10 / 15 / 20 / 30 / 40 / 50Nm
Rated voltage
230V AC / 50Hz on current page. 110V / 60Hz should be confirmed before order if required.
Limit system
Mechanical limit switch
Control system
Built-in receiver / remote control
OEM options
Cable length, plug, label, packaging, accessories and remote-control configuration upon request.
Technical data
YYGL45R model data from the current product page
| Model | Torque | Speed | Voltage | Frequency | Power | Current | Running time | Protection index | Max turns | Total length |
|---|---|---|---|---|---|---|---|---|---|---|
| YYGL45R-10/15 | 10Nm | 15rpm | 230V | 50Hz | 132W | 0.58A | 4 minutes | IP44 | 22/42 | 560 |
| YYGL45R-15/17 | 15Nm | 17rpm | 230V | 50Hz | 143W | 0.62A | 4 minutes | IP44 | 22/42 | 560 |
| YYGL45R-20/15 | 20Nm | 15rpm | 230V | 50Hz | 156W | 0.68A | 4 minutes | IP44 | 22/42 | 560 |
| YYGL45R-30/15 | 30Nm | 15rpm | 230V | 50Hz | 204W | 0.9A | 4 minutes | IP44 | 22/42 | 590 |
| YYGL45R-40/15 | 40Nm | 15rpm | 230V | 50Hz | 218W | 0.95A | 4 minutes | IP44 | 22/42 | 630 |
| YYGL45R-50/12 | 50Nm | 12rpm | 230V | 50Hz | 232W | 1.01A | 4 minutes | IP44 | 22/42 | 630 |
Mechanical data
- Motor diameter: 45mm
- Suitable tube: confirm by tube inner diameter and adaptor set
- Crown adaptor: matching crown required
- Drive wheel: matching drive wheel required
- Bracket and motor head: confirm according to installation side and head option
- Cable length: available upon request
- Manual override availability: not for YYGL45R; use YYGL45M if required
Control and application data
- Limit system: mechanical limit
- Receiver: built-in receiver
- Control method: remote control
- Wall switch compatibility: confirm according to wiring and control configuration
- External receiver: normally not required
- Smart control: available only with compatible controller or system
- Garage door / heavy shutter: needs torque, safety and manual operation confirmation
Dimension and installation
Confirm length, head clearance and tube insertion before sample order
The current YYGL45R page provides total length by torque version: 560mm for 10-20Nm, 590mm for 30Nm and 630mm for 40-50Nm. A full dimension drawing should be requested before final tube, bracket and curtain design approval.
- Motor overall length by torque version
- Head dimension and bracket mounting area
- Tube insertion depth
- Cable outlet position
- Minimum installation width
- Receiver programming access and setting note, if applicable
Dimension drawing status
Dimension drawing available upon request.
Tube and accessories
Tube, crown, drive wheel and bracket compatibility
| Tube type | Compatibility note |
|---|---|
| 60mm octagonal tube | Compatible with matching crown and drive wheel |
| 70mm octagonal tube | Compatible with matching crown and drive wheel |
| Round tube | Optional; confirm inner diameter |
| Special profile tube | Send tube drawing or sample for confirmation |
| Accessory | Compatibility note |
|---|---|
| Crown adaptor | Select according to tube profile |
| Drive wheel | Select according to tube profile and torque |
| Motor bracket | Confirm by motor head and mounting side |
| End cap | Confirm with tube and bearing side |
| Remote control | Use matching Walter remote-control products |
| Wall switch | Confirm according to wiring and control configuration |
| External receiver | Usually not required because YYGL45R has built-in receiver |
| Manual crank | Not for YYGL45R; use YYGL45M if manual override is required |
Final performance depends on tube diameter, curtain weight, accessory fitting, bracket alignment, radio signal environment and installation quality.
Receiver and limit setting
Remote control operation with mechanical limit setting
YYGL45R is an AC motor with mechanical limit setting and built-in receiver. It is designed for remote control operation without adding a separate external receiver in standard applications.
- Mechanical limits are adjusted after installation according to upper and lower end positions.
- Remote pairing, channel setting and direction setting should follow the matching Walter remote control instruction.
- Radio performance depends on installation environment, receiver compatibility and control distance.
- Do not connect multiple standard motors in parallel unless the selected model and control system support parallel wiring.
- For electronic limit, parallel control or app/smart system integration, compare with YYGL45B, YYGL45E or Walter compatible control products.
Control documents
Remote pairing guide and wiring diagram available upon request.
Application fit
Recommended applications and selection notes
| Application | Suitable? | Notes |
|---|---|---|
| Roller shutter | Yes | Suitable when remote control operation is required |
| Awning | Yes | Wind load and arm system must be evaluated |
| Zip screen | Yes | Check side guide friction and signal environment |
| Outdoor shading | Yes | Confirm installation protection and control distance |
| Roller blind | Possible | Smaller 25mm or 35mm motors may be more suitable |
| Garage door / heavy shutter | Need confirmation | Confirm torque, safety and manual operation requirements |
| Fire shutter | Not standard | Requires project-specific certification and validation |
Torque selection
Do not select torque only by curtain weight
For YYGL45R, torque selection should also account for the tube radius, friction, operating frequency and radio-control environment.
Load data
- Curtain or fabric weight
- Shutter size
- Tube diameter
- Lifting radius
System friction
- Side guide friction
- Awning arm load
- Accessory fit
- Bracket alignment
Project controls
- Operating frequency
- Safety factor
- Installation environment
- Radio control distance
- Manual override requirement
OEM / ODM
Configuration options for OEM motor supply
| Option | Available configuration |
|---|---|
| Voltage | 230V/50Hz shown on current page; 110V/60Hz to be confirmed by market and order |
| Torque | 10-50Nm according to current YYGL45R table |
| Cable length | Customizable upon request |
| Plug / connector | Optional; confirm by destination market |
| Motor head | Different head options available; confirm installation requirement |
| Remote control | Matching remote control options available |
| Radio frequency / protocol | Confirm according to market and remote-control system |
| Label | Walter / Hualite / private label |
| Packaging | Neutral or customer brand |
| Accessories | Crown, drive wheel, bracket, remote and wall switch where applicable |
| Sample order | Available |
| Batch production | Available for OEM customers |
Quality control
Quality control points for the YYGL45R series
Before assembly
- Incoming material inspection
- Stator winding inspection
- Rotor and gearbox assembly control
Function checks
- Receiver and control function check
- Hi-pot test
- Insulation resistance test
- Torque test
Final checks
- Limit switch test
- Remote control pairing test
- Noise inspection
- Aging test
- Final inspection before packing
Certification coverage
Confirm documents by exact model, voltage and market
Walter Motor can provide certification documents according to model and market requirements. Commonly requested documents include CE, LVD, EMC, RoHS and related test reports. For receiver or remote-control models, radio compliance requirements should be confirmed by destination market.
Certificate coverage should be checked by exact model, voltage, control system and target market before batch order.
Downloads
Request technical documents before sample approval
FAQ
YYGL45R buying questions
What is the main difference between YYGL45R and YYGL45S?
YYGL45S is the standard 45mm mechanical limit wired motor, normally controlled by a wall switch or external receiver. YYGL45R keeps the mechanical limit system but adds a built-in receiver, so it is selected when remote control operation is required.
Does YYGL45R need an external receiver?
In standard remote-control applications, a separate external receiver is normally not required because YYGL45R has a built-in receiver. The final control setup should still be confirmed by remote model, wiring plan and project market.
Can YYGL45R be controlled by remote control?
Yes. YYGL45R is designed for remote control operation with matching Walter remote-control products. Pairing, channel setting and direction setting should follow the matching remote instruction.
Is YYGL45R suitable for awnings?
Yes, YYGL45R can be used for awning projects when torque, arm system, wind load, installation protection and operating frequency are checked before selection.
Can YYGL45R be operated during a power failure?
YYGL45R is not the manual override version. If manual operation during power failure is required, compare YYGL45M or another manual override configuration.
How do I choose the correct torque for YYGL45R?
Torque selection should consider curtain weight, tube diameter, lifting radius, side-guide or arm friction, operating frequency, safety factor and installation environment. Send these details to Walter Motor for model recommendation.
Which tube size is compatible with YYGL45R?
YYGL45R can be matched with common 60mm and 70mm octagonal tubes when the correct crown adaptor and drive wheel are selected. Round or special profile tubes should be confirmed with an inner diameter drawing or sample.
Can Walter Motor provide OEM remote control, label and packaging?
Yes. Walter Motor can discuss OEM options for cable length, plug, matching remote control, label, packaging and accessories according to order quantity and destination market requirements.
Can I get datasheet, wiring diagram, pairing guide and certificates before ordering?
Yes. Buyers can request the YYGL45R datasheet, dimension drawing, wiring diagram, remote pairing guide, mechanical limit setting guide and certificate coverage before sample or batch order.
RFQ checklist
Information Walter Motor needs for model confirmation
- Application
- Curtain size
- Curtain weight
- Tube type and diameter
- Required torque or current motor model
- Voltage and frequency
- Control method
- Remote control requirement
- Radio frequency or market requirement, if specified
- Cable length and plug
- Accessory requirement
- Target quantity
- Destination market and certification requirement
- Whether manual override is required
Need help confirming YYGL45R compatibility?
Send your tube drawing, shutter size, application, remote-control requirement and target quantity. Walter Motor can help check torque, tube compatibility, control method, receiver configuration and OEM options before sample or batch order.
