Zip Screen Application
Zip screen projects require motor selection that considers fabric tension, side tracks, screen size, wind exposure and control configuration. Walter supports 45mm and 59mm motor pathways for outdoor shading systems where the complete system design is properly confirmed.
Quick Decision
Application Fit at a Glance
Best for
Outdoor zip screen systems with side tracks and controlled fabric movement.
Not recommended for
Projects expecting wind performance from motor choice alone.
Recommended motor diameter
45mm for standard systems; 59mm for larger or heavier-duty systems where required.
Typical torque range
20-100Nm depending on screen size, tube, fabric tension and wind exposure.
Recommended models
YYGL45S, YYGL45R, YYGL45E, YYGL59M, YYGL59MR.
Key data required
Screen width, height, tube diameter, fabric, side track system, wind exposure and sensor requirement.
Application Overview
Zip Screen Motor Selection Depends on the Complete System
A zip screen motor drives a fabric system exposed to outdoor conditions. Wind resistance is not a motor-only property; it depends on fabric, side tracks, brackets, fixing surface, installation quality and control strategy.
- YYGL45S is a standard 45mm AC option for many zip screen systems.
- YYGL45R supports remote-controlled zip screen projects.
- YYGL45E can be considered where electronic limit switch logic is required.
- YYGL59M and YYGL59MR are options for larger or heavier-duty systems where required.
- Wind sensor compatibility depends on the complete control system.
Selection Logic
Motor Selection Logic
Zip screen selection must consider fabric tension, side track load and outdoor exposure.
Wind exposure
Wind performance is system- and installation-dependent, not a motor-only claim.
Fabric tension
Higher fabric tension and larger screens may require higher torque.
Tube diameter
Confirm tube, crown, drive wheel and bracket compatibility.
Screen size
Width and height directly affect load and torque requirement.
Sensor compatibility
Wind or sun sensor use depends on receiver and controller configuration.
Limit system
mechanical or electronic limit switch should be selected by control design.
Cable routing
Outdoor cable routing should avoid water ingress and moving parts.
Installation surface
Brackets and fixing surface affect system stability.
Recommended Walter Models
Model Pathways for This Application
Final model selection should be confirmed according to load, tube, control configuration, accessory compatibility and market requirements.
| Model | Motor diameter | Limit system | Control type | Typical use | Why choose it | Link |
|---|---|---|---|---|---|---|
| YYGL45S | 45mm | mechanical limit switch | Switch control | Roller shutters, awnings, zip screens | Standard 45mm AC motor range for many outdoor shading and shutter systems. | View model |
| YYGL45R | 45mm | mechanical limit switch | built-in receiver | Remote-controlled shutters, awnings, zip screens | Useful when RF remote operation is required without a separate external receiver. | View model |
| YYGL45E | 45mm | electronic limit switch | built-in receiver | Advanced control projects | For applications where electronic limit setting or control integration is required. | View model |
| YYGL59M | 59mm | mechanical limit switch | manual override | Large shutters, large awnings, heavy-duty systems | Higher torque class for large or heavy-load applications requiring manual override. | View model |
| YYGL59MR | 59mm | mechanical limit switch | manual override + built-in receiver | Large remote-controlled outdoor systems | Heavy-duty class with receiver control and emergency operation capability. | View model |
Engineering Notes
Application Notes and Warnings
- Do not claim fabric waterproofing or wind class as a motor property.
- Wind resistance depends on the complete zip screen system, fabric, side track, bracket, fixing surface and installation.
- Avoid Class 6 wind claims unless the complete tested system and installation condition support them.
- Outdoor projects should confirm cable protection and service access.
Accessories
Accessories and Compatibility
Motor performance depends on the complete drive system, not only the motor.
Crown and drive wheel
Match the screen tube and load.
Bracket
Confirm bracket strength and fixing surface.
Remote / receiver
Use built-in receiver models where RF control is required.
Wind sensor
Use only with compatible control system and installation design.
Quality Process
Quality and Testing Support
Walter supports incoming inspection, electrical safety test, torque test, noise check, limit setting check, aging test and final inspection according to product and order requirements.
OEM & ODM
OEM Support for Zip Screen Motor Projects
Walter can support zip screen manufacturers with motor class selection, control configuration, sensor compatibility discussion, accessory matching, private label packaging and documentation support where available.
Send RFQ DetailsRFQ Checklist
What to Send Walter Motor
- Application type
- Width and height
- Tube diameter
- Curtain, shutter, fabric or slat weight
- Required torque or estimated load
- Voltage
- Control method
- Installation market
- Quantity
- Certification requirement
- Accessories needed
- Private label or packaging requirement
Related Links
Related Guides and Products
FAQ
Common Questions
Which motor is used for zip screens?
45mm motors are common for standard zip screens, while 59mm models may be considered for larger or heavier-duty systems.
Does the motor determine wind class?
No. Wind resistance depends on the complete system, including fabric, side tracks, brackets, fixing surface and installation quality.
Can zip screens use wind sensors?
Yes, where the selected receiver and controller are compatible with the sensor system.
When should I choose YYGL45E?
Choose YYGL45E when the project requires electronic limit switch logic or advanced control integration.
What information is needed?
Provide screen width, height, tube diameter, fabric, side track design, wind exposure, voltage and control method.
Can Walter support OEM zip screen projects?
Yes. Walter can support OEM configuration, accessories, labels, packaging and documentation where available.
Need a Zip Screen Motor Recommendation?
Send screen size, tube, fabric, track system, wind exposure and control requirement for a suitable Walter motor pathway.