YYGL59M is selected when a 45mm motor may not provide enough torque or mechanical strength. Manual override helps support emergency operation when power is unavailable.
Quick Decision Table
Best For
- Large roller shutters
- Heavy-duty shutter systems
- Garage doors requiring proper motor selection
- Industrial shading systems
- Heavy awnings
- Projects requiring manual operation during power failure
Not Recommended For
- Small residential roller blinds
- Narrow installation systems
- Battery-powered indoor blind systems
- Lightweight applications where a 45mm motor is enough
- Fire shutter or safety-critical projects without dedicated certification and validation
- Very frequent commercial operation without duty cycle confirmation
Why Choose YYGL59M?
59mm heavy-duty manual override motor for large roller shutters, industrial shutters, heavy awnings and projects needing emergency crank operation.
Model positioning
| Model | Decision note |
|---|---|
| YYGL45M | 45mm manual override for medium applications |
| YYGL59M | 59mm heavy-duty manual override |
| YYGL59S | Standard 59mm version if product exists |
| YYGL59E / YYGL59P | Electronic or other control versions if product exists |
| YYGL92M | Higher torque range if product exists |
Buyer outcome
This page reorganizes the original product information into a procurement decision flow: application fit, technical data, installation checks, accessory compatibility and RFQ information.
Use the technical table as a first filter, then confirm torque, tube system, control method and certification coverage with Walter Motor before order confirmation.
Key Specifications
Technical Data Table
| Model | Torque | Speed | Voltage | Frequency | Power | Current | Running time | Protection index | Max turns | Total length |
|---|---|---|---|---|---|---|---|---|---|---|
| YYGL59M-60/15 | 60Nm | 15rpm | 230V | 50Hz | 310W | 1.35A | >=4 min. | IP44 | Available upon request | Contact Walter Motor |
| YYGL59M-80/15 | 80Nm | 15rpm | 230V | 50Hz | 330W | 1.43A | >=4 min. | IP44 | Available upon request | Contact Walter Motor |
| YYGL59M-100/12 | 100Nm | 12rpm | 230V | 50Hz | 350W | 1.52A | >=4 min. | IP44 | Available upon request | Contact Walter Motor |
| YYGL59M-120/9 | 120Nm | 9rpm | 230V | 50Hz | 360W | 1.56A | >=4 min. | IP44 | Available upon request | Contact Walter Motor |
| YYGL59M-140/9 | 140Nm | 9rpm | 230V | 50Hz | 430W | 1.86A | >=4 min. | IP44 | Available upon request | Contact Walter Motor |
Dimension and Installation Information
Use the original YYGL59M dimension drawing for installation planning. Confirm bracket strength, crank access and shaft support before order. Garage door or heavy shutter applications need torque calculation and safety factor confirmation.
Tube, Crown, Drive Wheel and Bracket Compatibility
| Item | Compatibility check |
|---|---|
| Tube | Confirm tube diameter, inner shape and wall thickness before sample order. |
| Crown | Match crown profile to tube shape. Do not assume one crown fits all tubes. |
| Drive wheel | Confirm torque transmission, drive wheel profile and tube insertion depth. |
| Bracket | Check head style, fixing holes, load direction and manual crank access when applicable. |
| Accessories | Request a tube and bracket compatibility sheet for OEM projects. |
Related guide: tube, crown, drive wheel and bracket compatibility.
Heavy-Duty Manual Override Operation
Manual override is important for heavy shutter or door systems where emergency operation is required. Crank access, gearbox ratio, bracket strength and installation position must be confirmed. Door and heavy shutter systems also require safety devices and local regulation checks by the system designer.
For control and limit selection, compare the project requirement with the limit systems guide and request wiring or programming instructions before bulk order.
Recommended Applications and Selection Notes
Large roller shutters
Confirm load, tube, accessory and control configuration before order.
Industrial shutter systems needing torque confirmation
Confirm load, tube, accessory and control configuration before order.
Garage door projects after system-level validation
Confirm load, tube, accessory and control configuration before order.
Heavy awnings with correct bracket and duty cycle selection
Confirm load, tube, accessory and control configuration before order.
Torque, Power and System Selection Guidance
Correct selection depends on curtain size, fabric or shutter weight, tube diameter, friction, wind exposure, duty cycle and the required safety margin. If torque is uncertain, use the torque calculation guide and ask Walter Motor to check the model before sample order.
OEM / ODM Options
Electrical configuration
Voltage, frequency, cable length, plug and wiring requirement should be confirmed by market and order quantity.
Branding and packaging
OEM label, carton, manual, accessory kit and packing method can be discussed by project requirement.
Accessory matching
Crowns, drive wheels, brackets, transmitters, crank parts or charging accessories can be matched by exact system.
Quality Control for This Series
Walter Motor production control can include incoming material checks, assembly process inspection, final performance inspection and aging test according to model and order requirement. For factory process details, see Walter Motor production process.
Certifications and Compliance
Walter Motor can provide certification documents according to model and destination market requirements. Commonly requested documents include CE, LVD, EMC, RoHS and related test reports. Certificate coverage should be confirmed by exact model, voltage, control system and market before order confirmation.
For receiver, remote-control or smart-control models, radio compliance requirements should be confirmed by destination market.
Related page: certificates.
Related Products
FAQ
What is YYGL59M used for?
It is used for larger shutter and shading systems where a 59mm heavy-duty motor and manual override are required.
What is the difference between YYGL45M and YYGL59M?
YYGL45M is for medium 45mm applications. YYGL59M is a larger 59mm platform for higher torque projects.
Can YYGL59M operate during power failure?
Yes, when the correct manual override head, crank system and bracket arrangement are selected.
Is YYGL59M suitable for garage doors?
It may be considered only after torque, safety device, regulation and system structure checks.
How should torque be calculated for large shutters?
Use shutter size, material weight, tube diameter, friction, wind load and safety factor. Walter Motor can assist with initial selection.
What installation information is needed before order?
Provide tube drawing, bracket layout, shutter size, weight, crank access position and duty cycle requirement.
Can Walter Motor provide accessories for 59mm motors?
Crown, drive wheel, brackets, crank accessories and cable options can be confirmed by tube system.
Can certificates be provided for YYGL59M?
Certificate coverage should be confirmed by exact model, voltage, control system and destination market.
RFQ Checklist
To recommend the correct motor and configuration, please provide:
- application
- curtain / blind / shutter size
- curtain or fabric weight
- tube type and diameter
- required torque or current motor model
- voltage and frequency
- control method
- cable length and plug
- accessory requirement
- target quantity
- destination market and certification requirement
- manual override requirement
- crank access position
- emergency operation requirement
Need help confirming YYGL59M compatibility?
Send your tube drawing, application, size, weight, control requirement and target quantity. Walter Motor can help check torque, tube compatibility, control method, accessories and OEM configuration before sample or batch order.
