Solar charging accessory
MD-HSM36060 5V USB-C Solar Panel
A compact 360 × 60mm solar charging panel with regulated 5V USB-C output for compatible Walter rechargeable tubular motors used in roller blinds and smart shades.
Product overview
MD-HSM36060
MD-HSM36060 combines a compact panel, an integrated rear conversion/control module, a white cable and a USB Type-C male connector. The supplied 3M adhesive areas support clean window mounting. Its primary motor targets are WM25BR and WM25BZ.
Compatibility
Do not assume compatibility with every Walter battery motor. Confirm the motor, battery system and charging input before ordering.
Technical specifications
The dimensions and electrical data below are taken from the approved model drawing.
| Parameter | Specification |
|---|---|
| Overall dimensions | 360 × 60 mm; ±0.3 mm |
| Regulated charging output | 5V |
| Rated output power | 3.4W |
| PV working point | 6.3V / 530mA |
| Open circuit / short circuit | 7.5V / 560mA |
| Connector | USB Type-C male |
| Mounting | 3M adhesive areas for window mounting |
| Primary compatible motors | WM25BR / WM25BZ |
Product views and dimensions
Charging, installation and project confirmation
USB-C charging design
The regulated 5V charging output is provided through a USB Type-C male connector. Confirm the motor and battery charging input before ordering.
Installation with 3M adhesive
The supplied 3M adhesive areas support window mounting. The surface must be clean, dry and suitable for adhesion before installation.
Sunlight and installation considerations
Orientation, shading, glazing and site conditions affect the available charging input. Validate the actual position before final installation.
OEM and private-label support
For OEM projects, confirm the motor, battery, charging input, connector, mounting, labeling and packaging before the sample stage.
Downloads
Access the datasheet and controlled compliance documents after business-email verification.
Compliance documents
The EN IEC 61730-1, FCC Part 15B and RoHS documents cover the MD-HSM36060 / MD-HSM47060 model family. Product-specific specifications remain those shown in the model drawing.
Compliance family
EN IEC 61730-1
Certificate and test report HX-260701050681, issued 15 July 2026.
Compliance family
FCC Part 15B
Certificate and test report HX-260701050682, issued 15 July 2026.
Compliance family
RoHS
Certificate and test report HX-260701050683, issued 15 July 2026.
Other model in the series
Compare output, connector, mounting and target motor before selecting a panel.
FAQ
Is MD-HSM36060 a regulated 5V USB-C panel?
Yes. The model uses a regulated 5V charging output and a USB Type-C male connector.
Which motors are the primary compatibility targets?
WM25BR and WM25BZ are the primary compatibility targets. The final motor and charging configuration must still be confirmed.
Need project-specific confirmation?
Send the motor model, battery, charging input, connector, polarity and installation conditions.
