Solar charging accessory
MD-HSM47060 18.7V DC Solar Panel
A 470 × 60mm solar charging panel rated at 18.7V DC and 200mA for selected Walter battery tubular motor and solar shading systems.
Product overview
MD-HSM47060
MD-HSM47060 is the longer panel with a black cable, DC barrel connector and two end mounting holes. Its primary system match is WM35DS.
Compatibility
Other battery motor systems require confirmation of voltage, battery, connector and polarity. Do not assume automatic compatibility with WM45DS.
Technical specifications
The dimensions and electrical data below are taken from the approved model drawing.
| Parameter | Specification |
|---|---|
| Overall dimensions | 470 × 60 mm; ±0.3 mm |
| Rated output | 18.7V DC |
| Rated current | 200mA |
| Calculated nominal power | ≈ 3.74W (18.7V × 0.2A) |
| Open circuit / short circuit | 23.5V / 216mA |
| Connector | DC 3.5 × 1.35 mm male; center positive / outer negative |
| Mounting | Two mechanical end mounting holes |
| Primary compatible motor | WM35DS |
Product views and dimensions
Charging, installation and project confirmation
DC charging connection
The 18.7V DC / 200mA rated output uses a DC barrel connector. Confirm the connector and polarity against the approved configuration.
Two-hole mechanical installation
Two end holes provide mechanical fixing. Confirm the mounting position, substrate and cable route before drilling.
Sunlight and installation considerations
Orientation, shading, glazing and site conditions affect the available charging input. Validate the actual position before final installation.
OEM and connector confirmation
For OEM projects, confirm the motor, battery, charging input, connector, mounting, labeling and packaging before the sample stage.
Downloads
Access the datasheet and controlled compliance documents after business-email verification.
Compliance documents
The EN IEC 61730-1, FCC Part 15B and RoHS documents cover the MD-HSM36060 / MD-HSM47060 model family. Product-specific specifications remain those shown in the model drawing.
Compliance family
EN IEC 61730-1
Certificate and test report HX-260701050681, issued 15 July 2026.
Compliance family
FCC Part 15B
Certificate and test report HX-260701050682, issued 15 July 2026.
Compliance family
RoHS
Certificate and test report HX-260701050683, issued 15 July 2026.
Other model in the series
Compare output, connector, mounting and target motor before selecting a panel.
FAQ
What is the rated output of MD-HSM47060?
The rated output is 18.7V DC / 200mA, which is approximately 3.74W by calculation.
Is MD-HSM47060 automatically compatible with WM45DS?
No. Its primary compatibility target is WM35DS; any other battery system requires confirmation.
Need project-specific confirmation?
Send the motor model, battery, charging input, connector, polarity and installation conditions.
